DOMUSA TEKNIK Fusion Hybrid Gas Condens страница 33 Скачать руководство пользователя

Страница: 33 / 80

7.4

Operation with the DHW selector

(27)

For greater comfort in DHW, by means of the DHW selector

(27)

, it is possible to change the operating

mode and energy source that will work on the DHW demand.

By turning the DHW selector

(27)

to position the supporting module becomes the main energy

source for the DHW demand. The heat pump stops managing the production of DHW, leaving the

heating and production of DHW to the module. The DHW temperature for this operating mode will
become the maximum selectable in the heat pump.

In this operating mode, the display of the temperature of the DHW tank becomes

“

”

in a fixed way,

this being not its real temperature, as the complete management of the temperature of the DHW tank

is performed by the supporting module.

7.5

Operation with the Heating selector

(28)

For greater comfort in heating, by means of the heating selector

(28)

, it is possible to change the

operating mode and energy source that will work on the heating demand.

By turning the heating selector

(28)

to position the supporting module becomes the main energy

source for heating. The heat pump stops managing the heating demand, leaving the complete
management to the module.

The heating temperature for this operating mode will be the one selected in the module, see

“

Selecting the module setpoint temperature

”.

Содержание Fusion Hybrid Gas Condens

















































































Результаты поиска

Содержание Fusion Hybrid Gas Condens

Отзывы:

Похожие инструкции для Fusion Hybrid Gas Condens

Бренды по названию

Популярные бренды

DOMUSA TEKNIK Fusion Hybrid Gas Condens, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Fusion Hybrid Gas Condens

Отзывы:

Похожие инструкции для Fusion Hybrid Gas Condens

Бренды по названию

Популярные бренды