DOMUSA TEKNIK BIOCLASS HC, Инструкции по установке и эксплуатации для установщика

Страница: 23 / 72

21
9.1 Timers programming process
BioClass HM
boiler allows setting 2 different timers: boiler timer and fuel suction system timer. The
default setting for the timers is disabled ("
- - - -
"), so the functioning that is regulated by each timer
will operate 24 hours. The programming process is the same for any timer.
When the desired timer is displayed, press to access. SET symbol blinks to start the setting
process:
Select the time periods (30 minutes periods) by pressing "
+
" o "
-
" of heating
(18)
.
When the period desired is selected, change it state by pressing "
+
" o "
-
" of DHW
(19)
. The function
will be switched off if symbol is displayed and it will be switched on if symbol is displayed.
After setting all the periods desired, press to save and return to
“Setup menu”
level.
9.2 Boiler timer programming
This timer is used to adjust the switching on and off periods of the boiler
functioning. To disable the timer, select boiler timer programming ( )
and set it to “
- - - -
“ by pressing "
-
" of the boiler temperature touch button
(18)
. The boiler timer will be cancelled and it will be switched on
permanently.
9.3 Programming the Fuel suction system
This programme displays the status of the fuel suction system. This
process is used to adjust the periods during which the operation of the
pellet suction system will be enabled or disabled. To disable the timer,
select the
Fuel suction system
timer programming ( ) and set it to “
- - -
-
“ by pressing "
-
" of the boiler temperature touch button
(18)
. timer will
be cancelled and it will be switched on permanently.