DOMUSA TEKNIK BIOCLASS HC, Инструкции по установке и эксплуатации для установщика

Страница: 8 / 72

BioClass HC
6
4
INSTALLATION INSTRUCTIONS
The boiler must be installed by personnel authorised by the Ministry of Industry, in compliance with
the applicable laws and regulations.
This boiler is suitable for heating water to a temperature below boiling point at atmospheric pressure.
It must be connected to a heating installation and/or a domestic hot water distribution network,
which must always be compatible with its performance and power.
This appliance must only be used for the purpose for which it has been expressly designed. Any other
use is considered unsuitable and therefore hazardous. The manufacturer shall not be considered liable
under any circumstances for damage caused by unsuitable, erroneous or irrational use.
Remove all the packaging and check the contents are complete. In case of doubt, do not use the
boiler. Contact your supplier. Keep the packaging elements out of reach of children, as they can be
dangerous.
Be aware that the base of the boiler BioClass HC is fixed to the wooden pallet with four screws.
When you no longer wish to use the boiler, disable the parts that could be a potential source of
hazard.
4.1 Location
The boiler must be installed in a sufficiently ventilated site, away from humidity. It must be located
so that the air grilles on the premises are not obstructed and normal boiler maintenance is possible
even if it is placed between items of furniture. Respect the spaces indicated in the following picture.
d
e
c
b
a
a = mín. 0,5 m
b = mín. 0,5 m
c = mín. 1 m
d= mín. 0,5 m
e = mín. 2,5 m
a
b
c
d
e