INSTALLATION MANUAL
EN
WARRANTY
DOMUS Line guarantees the product only if powered with a
Converter supplied by us.
The warranty's general terms and conditions for this device are
available at
www.domusline.com
CAUTION
ONLY SUITABLE FOR DRY LOCATION
CABINET USE ONLY
USE ONLY 12Vdc CLASS 2 POWER SUPPPLY
TYPE IC RECESSED – INHERENTLY PROTECTED
TO REDUCE THE RISK OF FIRE DO NOT INSTALL CLOSER THAN
10mm TO THE CABINET WALL OR IN A COMPARTMENT SMALLER
THAN 300mm BY 300mm
CONNECTING THE DEVICE TO THE POWER SUPPLY
- Connect
ATOM TW
power supply cable to one of the light
colour dynamic adjustment systems (for example MAGIC TUNE,
TOUCH TW, X-DRIVER TW etc., sold separately) (fig.7)
- For installation and operation of the light colour dynamic
adjustment system see the specific item's manual.
- Then connect the light colour dynamic adjustment system to a
safe power supply with 24Vdc stabilised voltage (sold separately)
- If more than one device must be connected to the power
supply ensure that the total sum of the power absorbed by the
devices (check the plate data shown on the product label) does
not exceed the maximum power permitted by the Converter.
- DOMUS Line guarantees the product only if powered with a
Converter supplied by us.
WARNING:
The Led MODULE, the power supply cable or any switch used,
are not replaceable, therefore in case of damage the device
must be entirely substituted.
