Domotec Therm-Control DHB 370 C, Инструкции по установке

Страница: 48 / 56

MAIN SCREEN
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 17:00
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
GERMANY
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
14 : 14
SELECT WATER TEMPRATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
55 °C / 50°C
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-M
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
grey area
white area
blue area
C ontains 3 areas:
1. Actual Maintain temperature (blue area)
2. Next event temperature (grey area)
3. Hot water storage temperature (white area - if water heater sensor is connected
and active
A dditional icons for settings, relay ON/OFF), key lo ck or warning will be displayed.
When lock is "ON" a password is needed to access the parameter menus.
After the correct 4 numbers password is entered, each parameter in the setup can be
changed. The unit locks again after 10 minutes timeout (mo keys pressed).
SETTINGS
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 17:
00
NEXT
INFO, RESET, SERVICE, TEST , ...
CABLE TYPE, PIPE DAIMETER, ...
COUNTRY, LANGUAGES, UNITS, ...
APPARTMENT, MAINTAIN, ECONOMY, ...
SETTINGS
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
GERMANY
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
14 : 14
SELECT WATER TEMPRATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
55 °C / 50°C
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-M
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
SYSTEM
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 17:
00
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
TEST PROGRAM
RESET
SERVICE
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
GERMANY
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
14 : 14
SELECT WATER TEMPRATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
55 °C / 50°C
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-M
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
Info G eneral info about the unit, name, commissioning date, firmware
version, Domotec contact info.
Test
program
The test programme runs for 30 minutes, during which all
parameters will be ignored to check the heating cable and the
connection on site. You can stop the test programme at any time.
Reset S elect "YES" to activate the Quick install menu and return all
settings to factory settings.
Quick start process restarts automatically.
Service Access for Domotec technicians.
48 | Domotec.ch
MA I NTAI N TEMPERATURE
KEYLOCK FEATURE
INFO
STATUS
Status I nfo on current status of the control unit:
Pipe temperature
Water heater temperature
Maintain temperature
Supply voltage
Duty cycle
Power output
Max power output
Load current
K ey
lock
W hen key lock is "ON" , the setup and timer menus are protected
by password. To unlock the unit, enter the predefined password
(3000). The unit will automatically lock itself after 10 mins of
inactivity or when lock “on” key is pressed.
To deactivate the key lock, press “oFF”.