Digital Steam Press Instruction Manual
Page15
TROUBLE SHOOTING
Below is a chart detailing the most common problems, their causes and solutions. Before shipping any appliance to a service
center please check to make sure that the solution is not listed here:
PROBLEM
CAUSE
SOLUTION
Steam Press cannot be opened
using Pressing Handle.
Locking Knob is in Locked position.
Turn the Locking Knob to the unlocked
position.
Steam Press becomes warm but
DOES NOT
remove wrinkles.
Temperature Setting is not high enough
for the fabric attempted.
Gradually increase the temperature until
obtaining the desired results.
Temperature has not been selected.
Make a proper selection.
Press is not plugged into an outlet.
Plug the appliance in.
Press
DOES NOT
get warm.
Automatic
Shut-Off
has engaged.
The
Pressing Plate has been raised for
more than
15
minutes without use.
Press the
*POWER*
button again.
