44
DO937DV
ES
5.
Suelte el pasador de la bisagra de la abrazadera de la bisagra. De la vuelta a la abrazadera y vuelva a
fijar el pasador.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
6.
Fije los tornillos, el soporte de la bisagra y la pata de ajuste en el otro lado de la parte inferior.
Apriete ligeramente.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
7.
Coloque la puerta en su lugar con cuidado. Asegúrese de que la puerta está alineada tanto horizontal
como verticalmente, de manera que las juntas estén cerradas por todos los lados antes de unir
completamente la bisagra superior. Vuelva a colocar la bisagra y atornille en la parte superior del
aparato.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
8.
Vuelva a colocar la cubierta superior y fíjela con ayuda de los tornillos.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
DESPLAZAR SU APARATO
· Si el aparato se apaga por cualquier motivo, espere 10 minutos antes de volver a encenderlo. La
presión en el sistema de refrigeración se debe estabilizar antes de volver a encenderlo.
· Apague el aparato y retire el enchufe de la toma de corriente. Retire todos los alimentos. También
debe retirar todas las partes móviles (estantes, accesorios, etc.) o fijarlos en el congelador para evitar
choques.
