Domino V100, Руководство по эксплуатации и обслуживанию

Страница: 136 / 291

OPERATION
(3) Use Default
The user can enter a stored variable as default setting, by mark
The chosen
ing the field and write
“start contents” this function is only available when using
“on request “.
protocol used by the controller. Note that the input definition only affects the serial
interface and not the LAN interface.
Fou
•
is the key code of the character. Use this form to
he keyboard (like SOH, ETB, STX and ETX)
•
•
the text and the info that the
ce sends.
entered as a hexadecimal.
in the following format:
SerialVar=[STX]VarName[ETX],[STX]Value[ETX][ETB]
d by the following input definition:
2\v06\x03\x17
02)
led “Serial”)
03)
act match)
\x02 (STX = Hex 02)
\x03 (ETX = Hex 03)
\x17 (ETB = Hex 17)
Note: If you use the software libraries, the transfer is UNICODE, as opposed to the given
example (which is in ANSI).
(4) Input definition
This field can be used if the input device (i.e. scale) is not compatible with the
r types of entries are supported
\xNN: A single character. NN
input a character not found on t
\vNN: NN characters to be printed
\dNN: NN characters as “don’t care”
•
Clear text: There must be a direct match between
devi
Note: NN is to be considered a number in the range from zero to 255
As an example, number 77 (decimal) should be typed in as 4D (hex).
Example 1:
The V SERIES CONTROLLER expects data
[SOH]Fill
This can be achieve
\x01FillSerialVar=\x02Serial\x03,\x0
Explanation:
\x01 (SOH = Hex 01)
FillSerialVar= (Must make an exact match)
\x02 (STX = Hex
Serial (We assume that this particular variable is cal
\x03 (ETX = Hex
, (Must make an ex
\v06 (The input data is exactly (Hexadecimal)6 characters)
(
136
) 27864 Issue 1 January 2008