Domino D120i Blue IP, Руководство по эксплуатации продукта

Страница: 23 / 224

HEALTH & SAFETY
L025317 Issue 5 July 2014 1-3
GENERAL
The D-Series laser marking systems are designed and built in accordance
with international standards and other technical specifications, which are to
be observed. The equipment conforms to current technology and approved
safety requirements.
Domino D-Series Laser marking systems are produced by Domino Laser
GmbH Germany. For Sales and support contact Domino.
This safety standard, however, can only be achieved if all intended and
required measures have been taken and are constantly observed. It is part
of the operator’s duties to plan these measures and check their continuing
implementation.
The D-Series laser marking systems have been developed and designed for
fully automated marking of packaging materials and products by use of
laser radiation.
The user must ensure that:
• The laser system is only made ready for use after it has been installed
and guarded to Class 1 laser safety standards (EN60825), see
“HEALTH & SAFETY” on page 1-1.
• The equipment is only to be used for its intended purpose, see
“DESIGNATED USE” on page 1-4.
• The equipment is only operated in a good, serviceable condition, and
that all safety installations are regularly checked for their serviceability.
• Personal protective goggles for maintenance and repair personnel are
required and made available.
• Only suitable and approved tools and equipment are used.
• This Product Manual is complete and in a legible condition at the
equipment location at all times.
• The valid rules and laws regarding accident prevention are available
and observed.
• Only sufficiently qualified and authorised personnel shall operate,
maintain, and repair the laser marking system.
• These personnel are regularly instructed in all matters concerning
appropriate labour safety and environmental protection, and that they
are familiar with the operating manual, particularly the safety
instructions contained herein.
• Any safety and warning signs on the laser marking system must not be
removed and must remain in a readable condition.