Domino D120i Blue IP, Руководство по эксплуатации продукта

Страница: 194 / 224

MAINTENANCE AND FAULT FINDING
5-6 L025317 Issue 5 July 2014
10 DSP list buffer
empty. There is no data
available for the next
print. Coding file is at the last item,
or data from external
controller is late.
11 Encoder/Line too
fast (overflow). The message has not
been completed in
time. Slow down the conveyor,
reduce the mark time, or
move the text upstream on
the field.
12 Encoder/Line too
slow (underflow.) The message has not
been completed in
time. Reduce the mark time or
move the text upstream on
the field.
13 List buffer repeat
count fail. Internal Fault. Restart the system, re-store
backup. Contact Domino.
14 Maximum print to
print distance
exceeded. The maximum
distance between
print go signals has
been exceeded and
an expected print go
was not received. Check the sensor is set up
correctly, disable this function
if the check is not needed.
15 Print start signal
ignored. A print go has been
received too soon
after the previous. Check for switch bounce on
the print go, check for a
correctly set up sensor.
16 Maximum laser
on time exceed
(laser disabled by
hardware). The laser has been
firing for longer than
expected. Contact Domino.
17 Laser warm up. The laser needs a
short warm up period
before it can be
used. Wait until this warning goes
off before using the laser.
30 Scanhead power
missing. There is no +/-15v at
the scanhead, or no
data returning from
scanhead. Check connections to the
print head.
31 Scanhead
temperature out
of valid range. The scanhead is
cold. Wait for the heaters in the
scanner motors to warm the
scanners, the printer can be
used but you may experience
very minor position errors.
32 Scanhead
warming up -
please wait. The scanhead is
cold. Wait for the heaters in the
scanner motors to warm the
scanners, the printer can be
used but you may experience
very minor position errors.
33 Control unit over
temperature. The temperature in
the controller is very
cold or too hot. Check that the fans are
working and that the filters
are not blocked.
Status Message Cause Suggested Action