manualshive.com logo in svg

Domino D120i Blue IP, Руководство по эксплуатации продукта, Страница: 135 / 224

Поделиться
Скачать
Domino D120i Blue IP Скачать руководство пользователя страница 135

OPERATION

L025317 Issue 5 July 2014

3-31

Add an Image

To insert an image into the message:

• Press on the screen within a specific area of the Message Editor where

you require the item to appear. A cross hair will appear at this location.

• Select the Image 

 icon from the Add menu.

• An images folder stored in the printer will open.

• Browse for the required image.

• Select the green tick icon to insert the image.

Note:

Monochrome Bitmap (*.bmp), DXF (*.dxf) (up to Version 12, 
information about 3-dimensional objects is discarded, fonts and 
labels are not supported) and Hewlett Packard Graphics 
Language HPGL (*.plt) black white graphic file formats are 
supported. Supported commands for HPGL import are: Arc 
Absolute, Arc Relative, Plot Absolute, Plot Relative, Pen Up, Pen 
Down

• Select the Move 

 icon to move the copied item to the desired

location within the message.

• Activate the message for printing by sending it to the printer 

 via

the 

File

 menu 

Use the File Manager (

Home > Settings > File Manager

) to copy an image

from a USB device to the controller.

Image Object Properties

Force Reload - 

Tries to reload the imported graphic at message load.

When a graphic has been updated the new graphic is loaded into the
message.

Resolution (dpi)

 - Sets the resolution in dots per inch (dpi) of the lines that

make up the graphic file.

Bitmap Algorithm

 - Specifies how the graphic is marked. Options include

horizontal, vertical and outline.

Inverse

 - Generates the inverse of the graphic. Necessary if the marking on

the substrate is to be highlighted. Has no effect in Outline mode.

Содержание D120i Blue IP

































































































































































































































Отзывы:

Нет отзывов