Dometic Waeco PerfectView VT100DIG, Инструкция по установке и эксплуатации

Страница: 24 / 200

Technical description VT100DIG
EN 24
5.2 Control elements
You will find the following control elements on the transmitter module:
The receiver module has the following control elements:
No. in
fig. 6 , page 5
Meaning
1 Antenna connection
2 Pairing button
3 Operating mode display:
 LED glows red when signals are being transmitted
 LED flashes red when the components are being paired
4 Camera connection
5 Blue cable (CAMERA POWER TRIGGER): voltage supply for
camera and switch input for protective cover of CAM80 (see
page 28)
6 Green cable (REVERSE TRIGGER): control cable for activating
the pairing signal
7 Red cable (DC INPUT): Connection to the positive terminal of the
voltage supply; preferably ignition plus
8 Black cable (GND): Connection to the negative terminal of the
voltage supply or earth
No. in
fig. 7 , page 5
Meaning
1 Antenna connection
2 Pairing button
3 Operating mode display:
 LED glows red when signals are being transmitted
 LED flashes red when the components are being paired
4 Monitor connection
5 Green cable (REVERSE TRIGGER): control cable for activating
the pairing signal
6 Black cable (GND): Connection to earth