EN
Cleaning and servicing
TCX14, TCX21, TCX35
12
I
Interior space temperature at approx. 25 °C ambient temperature:
➤
If you want to select the temperature to
cool/heat
, press the “ ” button, until
the requested temperature range is reached.
6.8
Removing the lid
You can remove the lid of the cooling device (fig.
5
, page 3):
➤
Open the lid until it is at an approx. 30° angle to the cooler.
➤
Pull the lid forwards and lift it off diagonally.
7
Cleaning and servicing
!
A
➤
Occasionally clean the device interior and exterior with a damp cloth.
➤
Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
NOTE
The following temperature indications are subject to tolerances and are
dependent on the measuring position.
Status display
Temperature range
Cooling
seven illuminating LEDs
approx 0 °C in the interior space
an illuminating LED
approx 16 °C in the interior space
(ECO mode)
Heating
seven illuminating LEDs
approx 65 °C in the interior space
an illuminating LED
approx 48 °C in the interior space
WARNING!
Always disconnect the device from the power supply before you clean
and service it.
NOTICE! Risk of damage
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
