Dometic PerfectView MC 402, Руководство по установке

Страница: 18 / 244

EN
Troubleshooting MC402
18
➤
Conduct a function test before finally installing the device.
➤
Remove the two screws from the top of the device (fig.
6
1 page 5).
➤
Place the device into the slot and secure it with the fastening screws provided
(fig.
7
1 page 5).
➤
Fit the cover frame (fig.
8
1 page 6).
8 Troubleshooting
Problem Cause Remedy
The device will not switch on. The vehicle is not switched
on.
Switch the ignition to
ACC/ON or START.
The cables have not been
connected correctly. Check whether the cables
are correctly connected.
The fuse is faulty. Replace the fuse with a new
one of the same type (5 A).
No sound. The volume is set to mini-
mum. Check the volume.
The sound is muted. Switch the sound on again.
The reverse gear is engaged
when the reverse mute
function is activated. If required, disable the
reverse mute function.
The device or display are not
functioning correctly. The system is unstable (e.g.
the on-screen display is
frozen). Reset the system by pressing
the
RESET button.
The device will not play any
disks. The disc has not been cor-
rectly inserted. The disc must be inserted
with the label facing
upwards.
The disc is dirty or damaged. Clean the disc and check for
damage.
When the disc is playing, the
sound is interrupted by
vehicle vibrations. The device has been fitted at
an angle of more than 30° to
the horizontal. Fit the device at an angle of
under 30° to the horizontal.
Fit the unit so it is firm and
secure.
The radio receives no radio
stations. The aerial is not properly
connected. Connect the aerial correctly.
MC402-I-16s.book Seite 18 Freitag, 28. Oktober 2016 1:18 13