Dometic PerfectView MC 402, Руководство по установке

Страница: 17 / 244

EN
MC402 Installing the moniceiver
17
Pin assignment see fig.
9
A+B, page 7:
To perform the installation and the electrical connection, proceed as follows:
➤
Disconnect the negative terminal of the battery.
➤
Remove any existing audio system.
➤
Install the 2 DIN installation sleeve (fig.
4
, page 4).
➤
Bend the retaining tabs up, down and out at the sides in order to fix the housing
securely in the centre console (fig.
5
, page 4).
➤
Attach the fastening brackets to the device with the fastening screws provided
(M5 X 6)(fig.
6
, page 5).
➤
Connect the device to the electrical system in accordance with the circuit
diagram (fig.
9
, page 7).
Label Description
Power and voltage connector
ACC Ignition switching plus (terminal 15)
GND Earth (terminal 31)
B+ +12 V battery
KEY A No function assigned
KEY B No function assigned
KEY GND No function assigned
BRAKE Handbrake switch
REVERSE Reversing light
Loudspeaker connection
– rear right (+)
– front right (+)
– front left (+)
– rear left (+)
– rear right (–)
– front right (–)
– front left (–)
– rear left (–)
MC402-I-16s.book Seite 17 Freitag, 28. Oktober 2016 1:18 13