Dometic PerfectView CAM 360 AHD, Руководство по установке

Страница: 34 / 452

EN
Video system settings CAM360
34
The following materials are required to calibrate the camera angles:
•
Calibration set (refer tochapter “Accessories” on page 17):
–
4 calibration mats with calibration pattern (2.0 x 1.6 m)
•
5 measuring tapes with a minimum length of 10 m
•
Adhesive tape
Key for fig.
k
, page 10
➤
Position the four calibration mats as shown in fig.
k
, page 10 and secure them
with adhesive tape.
➤
Position the measure tapes as shown in fig.
k
, page 10.
➤
Turn on the ignition to activate the system.
➤
Press the button on the remote control.
➤
Select “CALIBRATION”.
➤
Enter the password “654321”.
No. in
fig.
k
,
page 10
Description of the dimensions
a, b, c, d Distance to vehicle 20 - 25 cm (depending on vehicle height)
L Length of the vehicle plus distance to the front and rear calibration mats
W Width of the vehicle plus distance to the right and left calibration mats
O Offset between front calibration mat and side calibrating mats (must be
identical on both sides)
CAM360-I-DE.book Seite 34 Freitag, 9. Juni 2017 6:50 18