EN
Intended use
PBC110
6
•
Danger of explosions!
Never attempt to charge a frozen or defective battery. Place the bat-
tery in a frost-free area and wait until the battery has acclimatized to the
ambient temperature. Then start the charging process.
• Wear goggles and protective clothing when you work on batteries.
Do not touch your eyes when you are working on the battery.
• Do not smoke and ensure that no sparks can arise in the vicinity of the
engine or battery.
A
NOTICE!
• Follow the instructions of the battery manufacturer and those of the
manufacturer of the system or vehicle in which the battery is used.
• If you need to remove the battery, first disconnect the earth connec-
tion. Disconnect all connections and all consumers from the battery
before removing it.
3
Intended use
The battery charger PBC110 is designed to charge, desulfate and maintain 12V lead
acid (GEL, WET, AGM) and LiFePO4 batteries with a capacity of 6 Ah to 200 Ah
(maintenance up to 240 Ah). It must not be used on other battery types.
The battery charger is designed for indoor use only. Good ventilation must be
ensured.
!
WARNING!
• Do not charge other batteries than 12 V lead acid and LiFePO4.
• Check the battery manufacturer specifications before using the
charger.
• Do not charge batteries with a cell short circuit. The oxyhydrogen they
produce can cause explosions.
• Do not charge non-rechargeable batteries.
• Do not use the device in unventilated rooms. Charging lead batteries
produces oxyhydrogen which can cause explosions.
• This device is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the device by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
device.
