EN
PBC110
Charging
13
Battery outside the vehicle
➤
Connect the red clip of the battery charger to the positive battery terminal (+).
➤
Connect the black clip of the battery charger to the negative battery terminal (-).
Battery in the vehicle
➤
Determine if the vehicle is positively or negatively earthed.
If negatively earthed (most common):
➤
First connect the red clip of the battery charger to the positive battery
terminal (+).
➤
Then connect the black clip of the battery charger to the vehicle’s chassis and
away from the fuel line.
If positively earthed:
➤
First connect the black clip of the battery charger to the negative battery
terminal (-).
➤
Then connect the red clip of the battery charger to the vehicle’s chassis and far
away from the fuel line.
7.3
Connect the battery charger to mains power
➤
Connect the battery charger to AC mains powered socket.
➤
The battery charger will automatically start when AC power is connected and
switched on.
➤
Check the settings of the device (battery type and charge rate). If necessary,
adjust them.
A
NOTICE!
If the Fault Indicator LED illuminates red, please check your connections as
it’s likely that the positive and negative leads are reversed.
7.4
Disconnect the battery charger
Battery outside the vehicle
➤
Switch OFF and remove the AC power socket from the outlet.
➤
First remove the black clip.
➤
Then remove the red clip.
