2
LA-03 MODEL AWNING INSTALLATION INSTRUCTIONS
SAFETY INSTRUCTIONS
This manual has safety information and instruc-
tions to help users eliminate or reduce the risk of
accidents and injuries.
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this
symbol in this manual, be alert to the potential for
personal injury.
Follow recommended precautions and safe op-
erating instructions.
UNDERSTAND SIGNAL WORDS
A signal word , WARNING OR CAUTION is used
with the safety-alert symbol. They give the level of
risk for potential injury.
indicates a potentially hazard-
ous situation which, if not avoided, could result in
death or serious injury.
indicates a potentially hazard-
ous situation which, if not avoided may result in
minor or moderate injury.
used without the safety alert
symbol indicates, a potentially hazardous situa-
tion which, if not avoided may result in property
damage.
Read and follow all safety information and instruc-
tions.
!
WARNING
!
CAUTION
CAUTION
!
1.
GENERAL INSTRUCTIONS
The A&E LA-03 awning is designed and intended for use on
Class A and higher motorhomes with straight sides. The
awning is factory preset with a 20°
slope. Approval is required
from Dometic for alternate mounting brackets (supplied by
the coach manufacture), and for mounting of the LA-03
awning on coaches with curved side walls.
IMPORTANT: Read and understand ALL of the following
steps before beginning installation.
Dometic Corporation reserves the right to modify appear-
ances and specifications without notice.
2.
MATERIAL REQUIREMENTS
Required parts for model 810XX18.000U &
810XX20.00U,
(2) Bracket, Mounting
(12) 3/8 X 3” Bolts, Carriage
(12) Washer, Flat
(12) Nut, Nylock
(4) Lock Mechanism W/Set Screws
(1) Key Fob
(1) Gasket, 12” longer than Awning Length
(1) Control Box Assembly
(1) Connector, Motor
(1) Sensor Wind
(1) Crank, Hand
Required parts for model 810XX22.000B &
810XX24.000B
(3) Bracket, Mounting
(18) 3/8 X 3” Bolts, Carriage
(18) Nut, Nylock
(18) Washer, Flat
(6) Lock Mechanism W/Set Screws
(1) Key Fob
(1) Gasket, 12” longer than Awning Length
(1) Control Box Assembly
(1) Connector, Motor
SPECIFICATIONS:
MODEL
18’
20’
22’
24’
Casing
Length
18’
20’
22’
24”
Height
9”
9”
9”
9”
Width
5.25”
5.25”
5.25”
5.25”
Weight (lbs.)
216
240
264
288
Arms
2
2
3
3
Mtg Brkt Plates
2
2
3
3
Backup Plates
4
4
6
6
Power Supply
120 VAC / 1 Phase / 60Hz.
Fuse Size
15 Amps.
Motor Amps.
1.8
Motor LR Amps.
2.26
Control Amp Draw
32
Milliampere
Extend/Retract Time
45 Seconds
Projection
10’ Nominal
Fabric
acrylic
