EN
FreshWell3000
Operating the under-bench air conditioner
19
8.3
Hint for improved use
The following hints will optimize the performance of your under-bench air
conditioner:
•
Improve the heat insulation of your vehicle by sealing gaps and hanging reflective
blinds or curtains on your windows.
•
If the vehicle has been subjected to direct sunlight for a long time: Operate the
under-bench air conditioner in the “Circulating air” (
) mode with the windows
open for a while before switching on the “Cooling” (
) air conditioning mode.
•
Avoid opening doors and windows as far as possible in the “Cooling” (
)
mode.
•
Select an appropriate temperature and blower speed.
•
Align the air nozzles sensibly.
•
Make sure the air nozzles and intake grille are not covered by cloths, paper or
other objects.
•
Clean the air filter periodically.
8.4
Switching the under-bench air conditioner on and off
I
When you switch on the under-bench air conditioner, the device waits a few minutes
before operating the compressor.
8.5
Selecting the air conditioning mode
I
➤
Select the air conditioning mode of your choice using the
MODE
key, see
chapter “Air conditioning modes” on page 15.
NOTE
•
When it is switched on, it begins to condition the air to the values that
were set most recently.
•
You can use the remote control to switch the under-bench air
conditioner to and from stand-by mode. Press the
button.
•
You can operate the under-bench by remote control and via LIN bus.
If you use LIN bus control the receiver is not required.
•
Don‘t use the under-bench air conditioner if the vehicle is tilted more
than 10°.
NOTE
The under-bench air conditioner must be switched
on
.
FreshWell3000_OPM_4445101821_EMEA16_20xx-xx-xx.book Page 19 Friday, January 13, 2023 3:23 PM
