EN
FreshJet
Installation
17
See fig.
c
➤
Choose the suitable seal in accordance with the following table:
➤
Position the seal with the adhesive side on the ADB.
➤
Fasten the fastening frame (
3
) on the underside of the roof air conditioner with
the 4 screws supplied.
See fig.
d
A
➤
Tighten the screws using a torque spanner and a fastening torque of 2.5 Nm.
8.8
Installing the air outlet unit
See fig.
e
➤
Install the air filter in the specified sequence.
See fig.
f
➤
Attach the air outlet unit magnetically to the fastening frame.
Roof thickness
Seal type
25 – 30 mm
15 mm
30 – 40 mm
30 mm
40 – 60 mm
45 mm
NOTICE! Damage hazard
Tighten to the specified torque.
FreshJet-ADB2015_INM_EMEA16.book Seite 17 Dienstag, 3. September 2019 4:33 16