18
2.3.3. Replacing heating element (cylindrical heating element) :
- Remove screws of electrical cover.
(Figure 61)
- Remove electrical cover.
(Figure 62)
- Pop out locking tabs of the base with a screwdriver, lift off printed circuit
board.
(Figure 63)
- Push off flat socket of heating element from flat connector with a
screwdriver
(x3 connector)
.
(Figure 64)
- Push off flat socket of the heating element’s protective grounding with a
screwdriver while the protective tab is pressed.
(Figure 65)
- Spread the the temperature controller connection of the heating element.
(Figure 66)
- Unscrew and remove the wire clamp.
(Figure 67)
Figure 61
Figure 62
Figure 63
Figure 64
Figure 65
Figure 67
Figure 66
