Dometic CRD0050, Руководство по установке, Страница: 21 / 324

EN
CRD0050 Using the refrigerator
21
➤
Set the temperature control knob (fig.
2
1 page 3) to “0”.
➤
Leave the door open.
8.3 Undo the lock
A
The refrigerator has a locking mechanism (fig.
a
1, page 7) which is also used to
protect it during transport. The following settings are possible:
•
Lock (turn wheel clockwise all the way): The drawer is locked and secured.
To open the drawer, lift the handle up and lift the drawer out.
•
Vent (turn wheel anti-clockwise all the way): The drawer is slightly open, but
fixed in position.
Use this position if you are not going to use the unit for a long time.
8.4 Switching off and storing the refrigerator
If you do not intend to use the refrigerator for a long time, proceed as follows:
➤
Set the temperature control knob (fig.
2
1 page 3) to level “0”.
The cooling unit is only switched off when you hear a click.
➤
Disconnect the power cable from the battery or pull the AC cable plug out of the
rectifier.
➤
Clean the refrigerator (see chapter “Cleaning and care” on page 22).
➤
Turn the locking wheel (fig.
a
1, page 7) anti-clockwise to the end stop
(“Vent”).
➤
Close the door until it latches in.
✓
The door stays open thus preventing smells from arising.
NOTICE!
Only adjust the locking mechanism when the drawer is open. The unit
will be damaged if this is adjusted when the drawer is closed.
CRD0050--IO-16s.book Seite 21 Donnerstag, 8. Dezember 2016 9:58 09