Dometic CRD0050, Руководство по установке

Страница: 15 / 324

EN
CRD0050 Installing and connecting the refrigerator
15
Install the refrigerator so that the warm air produced can easily flow away (either
upwards or to the sides). Therefore make sure there is adequate ventilation (fig.
3
,
page 4).
The condensation which forms during normal operation of the refrigerator can be
drained off via two outlets on the appliance. For delivery purposes, these outlets are
sealed. The two outlets are located on the rear and on the underside of the appliance
(fig.
4
, page 4).
➤
Choose the condensation outlet most suitable for the place of installation and
remove its cap.
➤
Insert a sharp object (e.g. a screwdriver) approx. 25 to 30 mm into the outlet to
pierce open the inside of the appliance.
➤
Remove the drip-tray (fig.
5
1, page 5).
➤
Connect a hose (fig.
6
2, page 5) to the outlet connections (fig.
6
1, page 5).
No. in
fig.
3
, page 4
Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the fridge if insufficient air can circulate above or at
the side.
CRD0050--IO-16s.book Seite 15 Donnerstag, 8. Dezember 2016 9:58 09