Dometic CK40D Hybrid, Руководство по эксплуатации

Страница: 10 / 192

EN
Operation CK40D Hybrid
10
6.2 Using the coolbox
A
➤
Place the coolbox on a firm base.
Connection cable plug
Connecting the cooler to 12 V (thermoelectric mode)
I
➤
Make sure the cable between the cooler and the battery is protected by a fuse
(maximum 5 A).
➤
Plug the 12 V connection cable (see figure) into the cigarette lighter socket or a
12 V socket in the vehicle.
✔
The cooler starts cooling the interior.
NOTICE! Risk of damage
• Do not switch on the device immediately after transporting it. This
could damage the cooling system. Leave the device to stand for
about 30 minutes after transporting, before you switch it on. This
allows the refrigerant to collect again in the compressor, and the
compressor does not run dry.
• Only operate the device from a single energy source. Simultaneous
use of the thermoelectric cooling system and the compressor is not
permitted.
• Ensure that the objects or goods placed in the cooling device are
suitable for cooling to the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy glass containers.
• Ensure that your cooler is well ventilated so that any heat created can
dissipate. Otherwise proper functioning cannot be ensured. It is
especially important not to cover the air vents.
• The clearance between the cooler‘s back and the wall should be
approx. 50 mm.
NOTE
In thermoelectric mode, the thermostat has no function and the device
cannot quick-freeze.
12 V 230 V
DometicCK40DHybrid_OPM_EMEA16_4445103300_2020-xx-xx.book Seite 10 Mittwoch, 14. Oktober 2020 11:30 11