Dometic CK40D Hybrid, Руководство по эксплуатации

Страница: 11 / 192

EN
CK40D Hybrid Operation
11
➤
To switch off the cooler:
–
Disconnect the plug.
– Wind the cable around the two holders on the back of the device for storage.
I
Connecting the cooler to 230 V (compressor mode)
➤
Connect the 230 V connection cable (see figure) to the 230 V AC mains supply.
➤
Switch the cooler on by pressing the “ON/OFF” button (fig.
2
2, page 3).
✔
The Display switches on and shows the current cooling temperature in °C.
✔
The cooler starts cooling the interior.
➤
To switch off the cooler:
–
Press the “ON/OFF” button (fig.
2
2, page 3).
– Disconnect the plug.
– Wind the cable around the two holders on the back of the device for storage.
✔
The display switches off.
Setting the temperature
The cooling capacity can be influenced by:
• The ambient temperature
• The number of wine bottles to be cooled
• The frequency with which the door is opened
➤
Press the “TEMP –” button (fig.
2
3, page 3), to decrease the desired cooling
temperature by 1 °C.
➤
Press the “TEMP +” button (fig.
2
4, page 3), to increase the desired cooling
temperature by 1 °C.
✔
The cooling temperature set at °C then appears in the display for a few seconds.
✔
The device acknowledges the chosen temperature’s acceptance by flashing the
display.
NOTE
Disconnect the cooler from the battery when the engine is not running,
as otherwise the battery will run down.
DometicCK40DHybrid_OPM_EMEA16_4445103300_2020-xx-xx.book Seite 11 Mittwoch, 14. Oktober 2020 11:30 11