Dometic CB36, Инструкция по установке и эксплуатации

Страница: 16 / 68

EN
Troubleshooting CB36, CB40
16
10 Troubleshooting
Compressor does not run
Fault Possible cause Remedy
U
T
= 0 V The connection between the battery
and the electronics is interrupted. Establish a connection.
Main switch defective (if installed). Replace the main switch.
Additional supply line fuse has blown
(if installed). Replace the fuse.
U
T

U
ON
Battery voltage is too low. Charge the battery.
Start attempt with
U
T

U
OFF
Loose cables.
Poor contact (corrosion).
Establish a connection.
Battery capacity too low. Replace the battery.
Cable cross section too low. Replace the cable
(fig.
3
, page 3).
Start attempt with
U
T

U
ON
Ambient temperature too high. –
Insufficient ventilation. Move the refrigerator.
Condenser is dirty. Clean the condenser.
Fan defective (if installed). Replace the fan.
U
T
Voltage between the positive and negative electronic terminals
U
ON
Switch-on voltage of the electronics
U
OFF
Switch-off voltage of the electronics