background image

2

This  service  manual  is  the  result  of  the 
dedication  of  The  Dometic  Corporation 
Technical,  Warranty  and  its  engineering 
staff  in  giving  service  people  the  nec-
essary  instruction  for  making  accurate 
analyses  of  certain  conditions.  Provided 

is  a  diagnostic  chart  leading  a  qualified 

mechanic into the service manual pages 
to locate and solve symptoms which may 
occur. Dometic has continued its commit-
ment in providing service people with this, 
the  most  up-to-date  information  about 
servicing Dometic RV accessories.

SAfETy INSTRUCTIONS

This manual has safety information and instruc-
tions to help users eliminate or reduce the risk 
of accidents and injuries.

RECOGNIzE SAfETy INfORMATION

This is the safety-alert symbol. When you see this 
symbol in this manual, be alert to the potential 
for personal injury.

Follow recommended precautions and safe op-
erating instructions.

UNDERSTAND  SIGNAL WORDS

A signal word

 

WARNING

 OR 

CAUTION

 is used 

with the safety-alert symbol. They give the level 
of risk for potential injury.

 

 Indicates a potentially hazard-

ous situation which, if not avoided, could result 
in death or serious injury.

 

Indicates a potentially hazard-

ous situation which, if not avoided may result in 
minor or moderate injury.

 

When used without the safety 

alert symbol  indicates, a potentially hazardous 
situation which, if not avoided may result in prop-
erty damage.

Read  and  follow  all  safety  information  and  in-
structions.

Содержание A&E Systems Sunchaser



















Отзывы: