PATTY O’ ROOM
TM
8
Since the Patty O’Room comes in an adjustable height,
it is designed such that adjustment for height can be
achieved by shortening the bottom of the panels. This
is done by folding the excess fabric at the bottom of the
panels so that the grommets line up with one another.
The fabric may be folded by folding back and forth upon
itself as shown in FIG. 15, or by rolling the fabric as
shown in FIG. 16. Either step is repeated until fabric
reaches the correct length for the vehicle. After the cor-
rect length has been established from inside the room
through the grommets stake to the ground.
28. The privacy panels can be rolled up and fastened with
the use of straps to allow for ventilation of the Patty
O’Room.
STORAGE:
Fold the side panels by laying them with the privacy
panels closed and the screen side up on a flat surface.
Fold the panel into a square by folding the upper portion
containing the pole pockets over the screened area.
Fold the bottom of the side up until it is even with the
first fold. Fold in half one more time before it is folded
into a size convenient to fit into the bag. Repeat this
with the other side panels and the front.
NOTE: If the Patty O’Room must be folded when wet it
should be removed from the storage bag as soon as
possible and set up to be dried.
CLEANING:
Periodically clean the fabric using a mild laundry deter-
gent or an approved awning or vinyl cleaner. When us-
ing a commercial cleaner be sure to follow the manu-
facturers instructions.
Use only a soft bristled brush for cleaning or scrubbing.
Be sure to clean both sides of the fabric and rinse thor-
oughly.
Allow the fabric to dry before storing your Patty O’Room.
FIG. 16
FIG. 15
