EN
Installation
FreshJet
16
Remote light switch (not included in the scope of delivery)
You can connect the lighting to a remote light switch. This enables you to switch on
the lighting remotely.
To do this, proceed as follows:
➤
Disconnect the 2-pin plug (
3
) from the socket on the circuit board of the air outlet
unit.
➤
Connect the two cables of the remote light switch to the 2-pin plug (
3
).
➤
Insert the 2-pin plug (
3
) into socket on the circuit board.
12 V
g
cable
You can connect the lighting to the battery. This enables you to switch on the lighting
even if the 230 V
w
voltage supply is not connected.
To do this, proceed as follows:
➤
Disconnect the 2-pin plug (
4
) from the socket on the main board.
➤
Connect the positive cable (
5
) with the plug.
➤
Connect the negative cable (
6
) with the plug.
Connecting the circuit board
See fig.
e
➤
Insert the 12-pin plug (
1
) in the socket (
4
) on the circuit board of the air outlet unit.
➤
Insert the two 2-pin plugs (
2
) in the sockets (
3
) on the circuit board.
FreshJet-ADB2015-I-16s.book Seite 16 Mittwoch, 8. März 2017 9:13 21
Содержание 9105306511
