EN
PP402 PAD, PP404 PAD
Cleaning and caring for the inverter
31
10
Cleaning and caring for the inverter
A
Caution
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤
Occasionally clean the device with a damp cloth.
11
Rectifying faults
12
Guarantee
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
Fault
Cause
Remedy
No output voltage
No contact to the battery
Check contact and cable.
Switch on the ignition if
necessary.
Overheating
Switch off power consuming
devices.
Let the inverter cool down
and ensure better ventilation.
Defective fuse (in the inverter
or the vehicle)
Replace the fuse with one of
the same specifications.
Device defective
Replace the device.
The device switches on and
off repeatedly
Excessive constant load
Reduce the load.
The inverter switches off
when the consumer is
switched on
Starting current too high
Compare the device power
with the maximum power of
the inverter.
The output voltage is too
low.
Battery voltage below 10.5 V
(PP402 PAD) or 21.5 V
(PP404 PAD)
Charge the battery (start the
engine).
_PP402_PAD_PP404_PAD_B.book Seite 31 Freitag, 20. Januar 2012 3:46 15
