EN
Fixing the coffee maker
PP402 PAD, PP404 PAD
28
Fasten the inverter as follows (fig.
5
, page 4):
➤
Clip two holders on the lower left bar and two on the right.
You can move the holders as required.
➤
Fasten the inverter by screwing one screw through each hole in the
holders.
6.2
Connecting the inverter
A
NOTICE!
Only extend the connection line with cables with an equal or
greater cross section.
Do not reverse the polarity. Reversing the polarity of the con-
nections will cause a great spark and the internal fuses will melt.
➤
To set up the inverter, connect the red cable (fig.
1
4, page 3) to the pos-
itive pole (+) of the battery and the black cable (fig.
1
5, page 3) to the
negative pole (–) of the battery. Make sure the battery poles are clean
when connecting the terminals.
7
Fixing the coffee maker
➤
Fasten the velcro strip to both sides of the coffee machine (fig.
6
,
page 5).
➤
Choose a suitable installation surface for the bracket:
– The installation surface must be level and sufficiently sturdy.
– Make sure that you can lay the connection cables.
– Make sure that you don’t damage parts by the installation.
➤
Fasten the bracket by screwing one screw through each hole (fig.
7
,
page 5).
Fixing the coffee maker (fig.
8
, page 5)
➤
Pull the locking plate forwards and keep it pulled (
A
).
➤
Put the coffee maker upon the bracket (
B
).
➤
Push back the locking plate (
C
).
_PP402_PAD_PP404_PAD_B.book Seite 28 Freitag, 20. Januar 2012 3:46 15
