Dometic GROUP WAECO FreshAir HDE Series, Инструкция по установке и эксплуатации

Страница: 30 / 224

EN
Installation FreshAir HDE
30
➤
Check the output voltage of the three phase generator (14 – 15 V).
➤
Check the efficient functioning of all electrically operated vehicle
components.
➤ If deviations are identified, please inform workshop management or
the vehicle owner.
6.2.2 Preparing the unit fastening
➤
Place the unit on the roof and make sure that the roof area of the cabin
is level (fig.
2 , page 3).
➤ Check whether the cut-out sections for the air inlet and outlet and the
installation of the cover can be completed inside the cabin.
➤
Remove the cover of the air conditioning roof unit.
➤ Mark the six fastening holes Ø 10 mm (fig. 3 1, page 4).
➤
Mark the rectangular opening for the air inlet (fig. 3 2, page 4).
➤ Mark the rectangular opening for the air outlet (fig. 3 3, page 4).
A
➤
Perform the holes and the openings (fig. 4 , page 4).
➤ Protect the holes and the openings with antioxidant.
6.2.3 Attaching the seal
A
➤ Apply sealing or something similar to prevent any water from getting
between the holes and the air vents (fig.
5 , page 5).
NOTICE!
Check that under the roof plate there are no electric wires, lining or
vehicle facilities near the holes.
NOTICE!
Ensure that the adhesive surface for the seal between the unit and the
cab roof is clean (free of dust, oil, etc.).