Dometic GROUP Waeco CAM60, Инструкция по установке и эксплуатации

Страница: 32 / 148

Mounting the camera
PerfectView CAM60
32
Creating a through-hole for the camera connection cable
(fig.
d , page 5)
I
NOTE
If possible, use available openings – such as ventilation grilles – to
feed the connection cables through. If there are no existing open-
ings, you must drill a hole with a 20 mm diameter.
A
NOTICE! Risk of damage!
Ensure that there is sufficient space on the other side for the drill
head to come out
➤
Drill a hole of Ø 20 mm near the camera.
➤
Deburr all drill holes that have been made in the sheet metal and apply
rust-protection.
➤
Place cable sleeves in all sharp edged ducts.
Mounting the camera
A
NOTICE! Risk of damage!
Only use the screws supplied to mount the camera in the camera
bracket. Longer screws will damage the camera.
➤
Push the camera into the camera bracket.
➤
Attach the camera loosely with the two screws M3 x 6 mm in the slots
(fig. e , page 5).
➤
Align the camera provisorily so that the lens is at an angle of approx. 50°
to the perpendicular axis of the vehicle (fig.
f , page 6).
A
NOTICE! Risk of damage!
Never mount the camera without the camera guard.
_CAM60.book Seite 32 Dienstag, 22. Dezember 2009 5:02 17