EN
BordBar TB08
Safety instructions
17
If the cooler is connected to the DC socket: disconnect the re-
frigerator or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
The cooling device is not suitable for transporting substances
which are caustic or contain solvents.
2.2
Operating the cooler safely
D
DANGER!
Do not touch exposed cables with your bare hands. This applies
especially when operating the device from the AC mains.
!
CAUTION!
Before starting the device, ensure that the power supply line
and the plug are dry.
A
NOTICE!
Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for that purpose.
Do not place the cooling appliance near naked flames or other
heat sources (heaters, direct sunlight, gas ovens etc.).
Danger of overheating!
Always ensure sufficient ventilation so that the heat generated
during operation can dissipate. Make sure that the cooling ap-
pliance is sufficiently far away from walls and other objects so
that the air can circulate.
Ensure that the ventilation openings are not covered.
Do not fill the inner container with ice or fluid.
Never immerse the cooling appliance in water.
Protect the cooling appliance and the cable against heat and
moisture.
Autogoods “130”
130.com.ua
