EN
BordBar TB08
Troubleshooting
21
9
Troubleshooting
Problem
Possible cause
Suggested remedy
Your cooler is not work-
ing and the fan wheel
which can be seen from
the outside is not turn-
ing.
No voltage is flowing
from the cigarette
lighter in your vehicle.
The ignition must be switched on in most
vehicles to supply current to the cigarette
lighter.
The ignition is on and
the cooler is not work-
ing.
Pull the plug out of the
socket immediately and
make the following
inspections.
The cigarette lighter
socket is dirty. This
results in a poor elec-
trical contact.
Clean the socket of the cigarette lighter
with a non-metallic brush and a solvent, to
ensure that the middle contact pin is clean.
If the plug of your cooler becomes very
warm in the cigarette lighter socket, either
the socket must be cleaned or the plug
has not been assembled correctly.
The fuse of the con-
nection cable has
blown.
Replace the connection cable fuse (5 A).
The vehicle fuse has
blown.
Replace the vehicle cigarette lighter fuse
(usually 15 A). Please refer to the operat-
ing manual of your vehicle.
Your cooler does not
cool satisfactorily and
the outer fan wheel is
not turning.
The fan motor is
defective.
This can only be repaired by an authorised
repair centre.
The cooler does not
cool satisfactorily and
the outer fan wheel is
turning.
The fan motor for the
inner fan is defective.
This can only be repaired by an authorised
repair centre.
The Peltier element is
defective.
The integrated mains
adapter is defective.
This can only be repaired by an authorised
repair centre.
Autogoods “130”
130.com.ua
