Dome DMMZ1, Руководство пользователя

Страница: 13 / 17

Page 13
Mouser Advanced User Manual
Compatible Command Classes
Command Class Notes
Notification V4 (71)
The Mouser sends a Notification Report when the trap is triggered,
reset, armed, and disarmed. It primarily uses the Pest Control Notifica -
tion Type, but also sends a Home Security, Motion Detected (Unknown
Location) Report when the trap is triggered and a Home Security, Event
Inactive when the trap is reset to ensure compatibility with all Z-Wave
Controllers.
Returned Value: 00 00 00 FF 13 XX 00 00
V1 Alarm Type : 00
(Unsupported)
V1 Alarm Level : 00
(Unsupported)
Reserved : 00
(Reserved)
Notification Status: FF
(Unsolicited Reporting is Enabled)
Notification Type : 13
(Pest Control)
Event :
Pest Exterminated —08
(Pest Exterminated, Unknown Location)
Pest Removed —00
(State Cleared)
Trap Armed —02
(Trap Armed, Unknown Location)
Trap Unarmed —04
(Trap Re-Arm Required, Unknown Location)
Sequence/Reserved/Event Parameters Length: 00
Notification Event Parameters : 00
(No Event Parameters)
Returned Value: 00 00 00 FF 07 XX 00 00
V1 Alarm Type :t 00
(Unsupported)
V1 Alarm Level : 00
(Unsupported)
Reserved : 00
(Reserved)
Notification Status: FF
(Unsolicited Reporting is Enabled)
Notification Type : 07
(Home Security)
Event :
Pest Exterminated —08
(Motion Detected, Unknown Location)
Pest Removed —00
(Event Inactive)
Sequence/Reserved/Event Parameters Length: 00
Notification Event Parameters : 00
(No Event Parameters)
Manufacturer Specific V2 (72)
Returned Value: 02 1F 03 01 01
Manufacturer ID: 02 1F
Product Type : 03
Product ID : 01 04
Wake Up V2 (84)
The wake-up interval is set in seconds, and is 43,200 seconds (12 hours)
by default. The wake-up interval can be set to any value from 300s (5
minutes) to 16,777,200s (about 190 days) in 60-second increments.
Configuration V1 (70)
See ““Configuration” Command Class Parameters” on page 14.
Table 5 - Command Classes Continued