Domaplasma IQ500, Руководство пользователя и инструкция по установке

Страница: 28 / 52

28
9. Take the supplied power cable and connect it to the C14 connection of the Domaplasma ®
filter. Connect both the plug of the Domaplasma ® filter and the plug of the cooker hood
to the power connection(s). Now, if appropriate, place the base and upper chimney of
the cooker hood back over the Domaplasma ® filter.
Fig. 8: Acces cable Fig. 9: C14 power connection
The Domaplasma
®
filter is now ready for use.
3.2 Electrical connection
Check before plugging into the electrical connection whether the data on the type plate and
the local power supply correspond. The type plate is placed next to the C14 power
connection of the Domaplasma ® filter. The Domaplasma ® filter is always provided with a
C13 cable and a grounded plug. These can be connected to any secured and grounded
power point of “230 Volt, 50 Hz”.
For aesthetic reasons, the (built-in) power connection should preferably be positioned
behind the chimney of the cooker hood so that it is not directly accessible/visible. Because
in this way the power connection is no longer accessible after installation of the chimney, it
is necessary to be able to switch off the power circuit to which the cooker hood and
Domaplasma ® filter are connected, before maintenance.
3.3
Metal grease filter
In order to achieve effective air purification, it is necessary to clean the metal grease filter
(aluminium or stainless-steel grease filter) regularly - preferably every 2 to 3 weeks.
Otherwise there is a risk that the grease filter and the Domaplasma ® filter “grease”, whereby
the efficiency of the Domaplasma ® filter is reduced or cancelled out.
In case “greasing” is detected, any warranty regarding the Domaplasma
®
filter is strictly
excluded.