background image

BC

632F

|  

Dolphin Blue

|  

13

LIMITED WARRANTY

Dolphin Solutions Ltd warrants that its electronic products will be free of

defects in material and workmanship during normal use for two years from

the date the product is purchased.

If a defect is found in normal use, Dolphin Solutions Ltd will, at its

discretion, repair, provide a replacement part or product, or make

appropriate adjustments. Damage caused by accident, misuse, or abuse is

not covered by this warranty. Improper care and cleaning will void the

warranty. Proof of purchase (original sales receipt) must be provided to

Dolphin Solutions Ltd with all warranty claims.

Dolphin Solutions Ltd is not responsible for labor charges, installation, or

other incidental or consequential costs other than those noted above. In no

event shall the liability of Dolphin Solutions Ltd exceed the purchase price

of the product.

If you believe that you have a warranty claim, contact your Dolphin

Distributor, Dealer or Plumbing Contractor. Please be sure to provide all

pertinent information regarding your claim, including a complete

description of the problem, the product, model number, the date the

product was purchased, from whom the product was purchased and the

installation date. Also include your original invoice.

DOLPHIN AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty excludes

product damage due to installation error, incorrect maintenance, wear and

tear, battery, product abuse, or product misuse, whether performed by a

contractor, service company, or the consumer. This warranty does not cover

product damage caused by the following:

- Incorrect installation.

- Improper manipulation, tampering, bad or lapsed maintenance.

- Use of the soap outside of viscosity specifications.

- Alteration of the original soap/foam dispenser components (including

pipes).

Содержание Dolphin Blue BCL632F

















Отзывы: