P 3 / 7
R
epair
[3] -2. Lubricating Mechanism, Front Hand Guard
[3] -3. Armature, Crank, Straight Bevel Gears 14 and 43
1) Remove Sprocket cover.
2) Remove six Screws that fasten Spike bumper and Front handle.
(Fig. 3)
3) Turn the machine upside down. Remove Front handle while
pulling in the direction of the arrow. (Fig. 4)
4) Remove Tank cap and Cover.
5) Pull out Tube, and remove Oil pump.
6) Remove Compression spring 6 and Front hand guard. (Fig. 5)
Note: Be sure to remove Compression spring 6 before
removing Front hand guard so that Compression
spring 6 cannot fly away.
Fig. 3
Fig. 5
Fig. 6
Fig. 7
Spike bumper
Front handle
Screw
Screw
Fig. 4
DISASSEMBLING
DISASSEMBLING
Do the reverse of the disassembling steps.
Note: When installing Front hand guard, fit the protrusion
on Front guard in the concave portion on Rod. (Fig. 6)
1) Remove Carbon brushes.
2) Remove up to Front handle.
[Follow the steps 1), 2), 3) of [3] -2.]
3) Remove Tank cap, and unscrew four screws
that fasten Motor housing and Housing with
a long Phillips screwdriver (Fig. 7)
4) Pull off Motor housing, and take out Armature.
Straight bevel gear 14 can be easily removed
by hand.
Note: Be careful not to drop Straight bevel gear 14
down on work bench, floor or your foot.
ASSEMBLING
Front hand guard
Compression spring 6
protrusion on Front hand guard
concave portion on Rod
Straight bevel gear 14
