![background image](http://html.mh-extra.com/html/dolmar/dcs34/dcs34_owners-and-safety-manual_2517027019.webp)
19
1
2
3
4
5
Position the guide bar (
6
). Make sure that the pin (
7
) of the
chain tightener is in the hole on the guide bar.
Turn the chain adjusting screw (
4
) to the left (counterclock-
wise) until the pin (
5
) is at the left stop.
Mounting the guide bar and saw chain
Use the universal wrench delivered with the chain saw for
the following work.
Put the chain saw on a stable surface and carry out the
following steps for mounting the guide bar and chain:
Release the chain brake by pulling the hand guard (
1
) in
direction of arrow.
Unscrew retaining nuts (
2
).
Pull off the sprocket guard (
3
).
C
D
PUTTING INTO OPERATION
CAUTION:
Before doing any work on the guide bar or chain, always
switch off the engine and pull the plug cap off the spark
plug
(see "Replacing the spark plug")
. Always wear protective
gloves!
CAUTION:
Start the chain saw only after having assembled it
completely and inspected!
6
7
STOP
B
A