Dolmar AH-3756, Инструкция по эксплуатации

Страница: 5 / 64

5
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Battery indicator
4-1. Knob
4-2. Housing
5-1. Switch trigger B
5-2. Switch trigger A
5-3. Lock-off button
6-1. Adjusting dial
9-1. Trimming direction
9-2. Hedge surface to be trimmed
9-3. Tilt the blades
14-1. Press 14-2. Chip receiver
14-3. Nut
14-4. Shear blade
15-1. Nut
15-2. Branch catcher
16-1. Hooks
16-2. Fit the hooks into groove
16-3. Grooves
17-1. Press the levers on both sides
17-2. Unlock the hooks
18-1. Blade cover
18-2. Screws
19-1. Under cover
19-2. Blade cover
19-3. Screws 20-1. Plate
21-1. Crank
22-1. Screws
22-2. Shear blade
23-1. Crank
24-1. Oval hole of shear blade
26-1. Oval hole of shear blade
26-2. Crank
26-3. Screws
27-1. Crank
28-1. Limit mark
29-1. Holder cap cover
29-2. Slotted screwdriver
30-1. Brush holder cap
30-2. Slotted screwdriver
SPECIFICATIONS
Model AH-3756 AH-3766
Blade length 550 mm 650 mm
Strokes per minute (min
-1
) 1,000 - 1,800
Overall length 1,065 mm 1,135 mm
Rated voltage D.C. 36 V
Net weight 5.1 kg 5.2 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Sound pressure level Sound power level
Model L
PA
(dB (A)) Uncertainty K (dB (A)) L
PA
(dB (A)) Uncertainty K (dB (A))
Applicable standard
or directive
AH-3756 81.5 2.1 91 1.5
AH-3766 82 1.4 91.1 1.5
2000/14/EC
• Wear ear protection.
Vibration
Model
Declared emission (m/s
2
) Uncertainty K (m/s
2
)
Applicable standard
or directive
AH-3756 / AH-3766 2.5 1.5 EN60745
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
END013-4
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Do not expose to rain.
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
Cd
Ni-MH
Li-ion