Dolby Laboratories DSP100, Руководство пользователя

Страница: 61 / 76

Replacing a Show Store Power Supply
Dolby ® Digital Cinema Presentation System User’s Manual 49
2. Press the red button to turn off the buzzer, and disconnect the failed power supply’s
AC power, as shown in Figure 4 ‐ 10.
Figure 4-10 Turn Off Buzzer and Disconnect AC Power
3. Use a Phillips screwdriver to remove the retaining clip’s two screws, then pull the clip
away from the rear panel to remove it, as shown in Figure 4 ‐ 11.
Figure 4-11 Removing the Retaining Clip
4. Grasp the pinch lever at the top of the failed power supply, then pull the unit out of
the Show Store, as shown in Figure 4 ‐ 12. Each unit is labeled with its Dolby Cat. No.
Figure 4-12 Removing the Failed Power Supply
Red buzzer button
Disconnect AC power
from failed power supply
Pinch lever