Doka 150F Скачать руководство пользователя страница 27

Страница: 27 / 68

User Information

Climbing formwork 150F

Operating the formwork

999775002 - 02/2020

Operating the formwork

Closing the formwork

➤

Detach the fixing-wedges

(B)

➤

Release the pressure wedge

(A)

➤

Turn the screwjack mechanism of the scissor-action

spindle to move the formwork forward until it meets

the top of the previously cast section.

➤

Adjust the formwork and level the positioning points.

See the section headed "Plumbing & aligning".

➤

After adjusting the formwork elements, tighten the

pressure wedges

(A)

This presses the formwork element up against the

previously cast section.

➤

Knock the fixing-wedges

(B)

into place.

This fixes the Vertical waling to the Climbing bracket.

Possible incorrect usages

This section only deals with how to operate the

formwork. For details of how to tie the form-

work, please see the User Information book-

lets 'Large-area formwork Top 50' or 'Framed

formwork Framax Xlife'.

9775-258-03

9775-258-02

9775-201-01

NOTICE

It only takes a gentle blow of the hammer to fix

the pressure wedge! The concrete loads are

sustained by way of the form-ties and are not

transferred via the wedge.

NOTICE

Improper handling and use of the formwork

equipment can lead to hazardous situations.

These must be prevented under all circum-

stances.

WARNING
No additional forces are to be transferred

into the formwork:

➤

Do not use hoists or other such devices for

positioning and adjusting the formwork.

➤

Do not use the formwork to force incorrectly

placed reinforcement steel into position.

➤

Always press the formwork against the con-

crete without applying force. Do not use any

additional devices (such as extra screwjack

mechanisms) on the Travelling gear.

➤

Never use 'brute force' on the adjusting spin-

dles (e.g. with tube-extensions).

9775-203-01

9775-204-01

Содержание 150F





































































Результаты поиска

Содержание 150F

Отзывы:

Doka 150F, Инструкция по сборке и эксплуатации, Страница: 27 / 68

Результаты поиска

Содержание 150F

Отзывы: