Doheny's 90500 Скачать руководство пользователя страница 8

General Maintenance

1. Clean strainer basket regularly. Do NOT strike  
  basket to clean. Inspect strainer cover gasket  
  regularly and replace as necessary.
2. Pumps have self-lubricating motor bearings and  
  shaft seals. No lubrication is necessary.
3. Keep motor clean. Ensure air vents are free from  
  obstruction to avoid damage. Do NOT use water  
  to hose off motor. 
4.  Occasionally, shaft seals must be replaced, due to  
  wear or damage. 

Storage/Winterization

 Maintenance

1.  Do not purge the system with compressed air. Use only a low  
  pressure (below 5 psi), high volume blower when air purging  
  the pump, filter or piping.
2.  Allowing the pump to freeze will void the warranty.
3.  Use ONLY propylene glycol as antifreeze in your pool/spa system.
4. Drain all water from pump and piping when expecting  
  freezing temperatures or when storing pump for a long time. 
5. Keep motor dry and covered during storage. To avoid  
  condensation/corrosion problems, do NOT cover or wrap  
  pump with plastic film or bags.

1 Year Limited Doheny's Pool Pump Warranty

Please read installation instructions before installing pool pump

This pump was inspected before shipment from our warehouse. To original purchasers of this pump, Doheny 
Enterprises, Inc., 10411 80th Ave, Pleasant Prairie, WI, warrants its products free from defects in materials and 
workmanship for a period of 

ONE

 (1) year from the date of purchase. 

Parts which fail or become defective during the warranty period, except as a result of freezing, negligence, 
improper installation, use, or care, shall be replaced, at our option, without charge, within 90 days of the receipt 
of defective product, barring unforeseen delays. 

After 90 days, to obtain warranty replacements, defective components should be returned, transportation paid, to 
the place of purchase. For further Doheny’s service, contact Doheny’s cus tomer care department. No returns may 
be made directly to the factory without the express written authorization of Doheny Enterprises, Inc. 

To original purchasers of this pump, Doheny Enterprises, Inc. warrants its pump housing/strainer to be free from 
defects in materials and workmanship for a period of 

ONE

 (1) year from the date of purchase.

Strainers which become defective during the warranty period, except as a result of freezing, negligence, improp-
er installation, use or care, or as the result of a use in association with an automatic valving system.

All other conditions and terms of the standard warranty apply.

Doheny shall not be responsible for cartage, removal and/or reinstallation labor or any other such costs incurred 
in obtaining warranty replacements. 

The Doheny Enterprises, Inc. warranty does not apply to components manufactured by others. For such products, 
the warranty established by the respective manufacturer will apply.

Some states do not allow a limitation on how long an implied warranty lasts, or the exclusion or limitation of inci-
dental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Содержание 90500









Отзывы: