Dogtrace DOG GPS X20, Руководство пользователя

Страница: 11 / 19

11
7.1 Receiver charging
Receiver contains Li-Pol accumulator. Before first use,
the accumulator must be recharged.
1.
Before charging clean the receiver charging contacts
from any dirt. Connect the charging clip to the recei-
ver (see the picture).
2.
Connect supply cable to the power adapter and plug
it into the mains.
3. Lines in battery symbol start to show gradually on
LCD.
4.
Charging time is approximatelly 3 hours.
5.
Accumulator is charged, when the battery symbol is full – see below.
7 Receiver preparation (handheld device)
7.2 Receiver accumulator status check
The accumulator status of the receiver is indicated on the battery symbol in the Infor-
mation panel of the receiver - upper display line.
7.3 Receiver setting
Switching receiver ON/OFF – hold the button for 2 seconds.
To choose the dog, press / .
To switch ON/OFF the LCD backlight, press shortly backlight will shine for
15 minutes, after that it will switch itself off automatically.
7.4 Pairing – coding of transmitter (collar) with receiver (handheld
device)
1.
Switch ON the receiver and transmitter, which you need to pair together –
switch
OFF other transmitters .
2.
Hold the button
CODE
on the receiver for 2 seconds.
status charge receiver
100%
70%
40%
10%
WARNING:
Optimal temperature for charging is from 0°C up to 40 °C. Use only the
original power adapter supplied in the packing with the device. Other chargers
could damage the accumulator.