DOGA GX-H Series, Инструкция по эксплуатации

Страница: 5 / 32

Instructions manual / GX-H & GXA-H 40 Volts Screwdrivers
5
- Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
-
Maintain tools with care . Keep cutting tools sharp and clean. Properly maintained tools, with sharp
cutting edges are less likely to bind and are easier to control.
-
Check for misalignment or binding of moving parts, breakage of parts, and any other condition
that may affect the tools operation. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
-
Use only accessories that are recommended by the manufacturer for your model. Accessories
that may be suitable for one tool, may become hazardous when used on another tool.
1.5 SERVICE
- Tool service must be performed only by qualified personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury
-
When servicing a tool, use only identical replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance
instructions may create a risk of electric shock or injury.
2.
SPECIFIC SAFETY RULES
2.1 Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2.2 Never lubricate aerosol oil on to the electrical part.