DOGA DSE Series, Инструкция по эксплуатации

Страница: 11 / 16

DSE Série 11
1. GENERAL SAFETY RULES
Always observe the following rules to assure safe use of the tools !
■ Do not operate the impulse tools unless you fully understand the instructions contained in this manual. If
any unclear, please contact your distributor.
■ Never expose to rain or use in damps locations.
■ Always use the proper pressure at air inlet. Apply either less or exceed air inlet pressure will affect the
performance of the tools, including quality, torque, function, and life, then lead to damage.
Air inlet pressure standard
0,5 Mpa~0,6 Mpa (5,2kg/cm² ~6,2kg/cm²)
■ Always add oil about 0,5~1cc at air inlets at least every week to maintain the performance and the life of the
impulse tools.
■ Keep children away. Tools must be kept in a safe and clean position where children cannot reach.
■ DO NOT force tools. The tool will be damaged easily and quickly if over-load over 15 seconds.
■ Always use the proper length of air house. The length of air hose shall not exceed 5m, or the pressure
reduces. Make sure the air inlet pressure is in between the standard number (0,5Mpa~0,6Mpa) before
operating tools.
■ Always use safety glasses and earphone.
■ Always operate the tools by two hands. One hand operation may cause risk of injury to persons.
■ Disconnect the air hose and the quick nipple after operating tools. Be sure to return tools to safety position.
Tools drop or unintentionally contact can cause risk of injury.
■ Install the safety buckle to avoid tools drop while operating in high position.
■ Never contact with any electricity conducted objects to avoid electricity shock hazard.