DOGA BMT Series, Инструкция по эксплуатации

Страница: 46 / 68

Manual transducerized BMT series DOC.60425-05/21 44
11.3.2 Fastening errors
Code Nombre Description
FASTENING TIMOUT 300 Over time limit on A242(Forward run time limit)
LOOSENING TIMOUT 301
Over time limit on A243(Loosen run time limit)
OVER TIME LOOSEN 304 Motor stall by loosening failure within time limit on A244
OVER_TRQ_BEFORE_RAMP_UP 305 Target torque reached before seating point and ramp up.
MIN ANGLE 330 Target torque reached before the Min angle
TARGET ANGLE SET 331 Target angle setting is out of the range [AC/TM mode]
MAX ANGLE 332 Target torque reached over the Max angle
FASTENING STOP 333
Operation stops before complete cycle of torque up by releasin
g lever trigger
FIND ENGAGING TQ 334 The engaging torque is not detected in time or angle limit
C_TORQUE LIMIT 335 Converted torque is out of torque limit (%)
FASTEN OVER TQ 336 Torque reached to the high limit of torque capacity
TQ_UP DURING F_SPEE 337 Torque up when free speed zone
THREADTAP MAX TORQUE 338 Torque reached when ThreadTap max torque zone
THREADTAP MIN MAX
RANGE OVER
339 Over ThreadTap torque Min, Max range
OVER TEMP MOTOR 500 Motor temperature over 80°C
OVER TEMP BATTEY 501 Battery temperature over 80°C