Switch positions
schwarz/black
braun/brown
blau/blue
Installation and operating manual
for float switches from the Champ 2 HD series
This installation and operating manual is aimed at qualified electrical specialists.
Electrical laypersons should not electrically connect devices of this type due to the
considerable potential dangers. The installation and operating manual must be kept
so that it can be referred to at a later stage.
Application instructions and warnings
1.
Devices with visible damage must not be installed or used.
2. If the float switch is used for filling, the system must be fitted
with a suitable overflow.
3. When connecting the float switch, you must note the nominal load of the switch
contact – overloading must be prevented.
4. Obstacles in the area around the float-switch flow
may result in the control system malfunctioning.
5. The hysteresis is determined by the movable float-switch cable
length to the fixed point.
Intended use and installation
Float switches are used for fill-level-linked pump control, particularly in waste-water
and sewage tanks. Depending on the electrical connection and cabling, they can be
used for filling and/or emptying (see switch positions).
Warranty
All professionally installed, unaltered devices are covered by warranty during the
statutory guarantee period from the day of purchase by the end user. The warranty is
not applicable to damage incurred during transport or caused by short-circuit, over-
loading or improper use. In the event of defects in workmanship or material being dis-
covered within the warranty period, the company will provide a repair or replacement
free of charge. The warranty will be rendered null and void if the device is opened
without authorisation.
Technical data
Champ 2 HD float switch
Rated voltage
250 V AC
Max. operating temperature
50°C
Protection class
IP68
Rated current
10 (3) A
Dimensional drawing
100
160
52,5
13,2
Doepke
3932161
|
12/2014
|
Doepke Schaltgeräte GmbH, Stellmacherstraße 11, D-26506 Norden
DE EN
